This was an experiment. I managed to change the look of the fabric, but I don't think it was necessarily an improvement.
It started with a piece of dyed fabric that had some type of Chinese characters stamped on it. I didn't create the fabric and I didn't care for it. I wanted to improve it with some layers of paint.
I pinned the fabric to my print board, and wrapped ribbon around the pins to create a grid of sorts. I screen-printed the large circles using a Photo EZ screen, and stamped the smaller circles. The ugly background fabric continued to show through.
Once the paint was dry, I removed the ribbon to see if the ribbon resist created much of an impact. It's noticeable, but not too impressive. Oh well! Sometimes, the best lessons are learned when the experiment doesn't go as planned. Some things can't/shouldn't be saved.
Fortunately, the next painting project is an improvement. As you can see, progress was made on the patio covers. Looks nice and neat, doesn't it? Unfortunately, it didn't last very long.
This is what it looks like today. A mess! These 2" x 2" pieces of wood need a layer of primer, then 2 layers of red paint. There are 4 tables full of these wood pieces, that's over 120 pieces that need 3 coats of paint! Sheesh, we spent all weekend painting and still need to spend one more day to finish the painting. By the time we finish, we'll have two nice shady areas on the patio. We definitely need somewhere to escape from the CA sun.
2 comments :
I quite like your altered fabric! Sliced up as hexies or irregular sizes and patchworked back togther might add further dimension to it maybe?
That altered fabric might make a fantastic lining for a little purse!
Post a Comment